Insights & Buying Guides

6mm MR plywood is a thin IS 303 interior grade bonded with urea-formaldehyde resin, priced for non-structural jobs and built for periodic humidity, not immersion or boiling water. Compare retail, dealer and mill-gate pricing, ideal uses, red flags and alternatives.

Shuttering plywood is formwork ply used to cast concrete slabs, beams and columns, and most 8x4 ft sheets cost about ₹1,200-2,200 depending on thickness and grade. A good sheet lasts 10-25 reuse cycles, which drives the real cost per pour.

Marine plywood is a boiling water proof (BWP) grade made to IS 710 that survives repeated boiling cycles without delamination, and gurjan or other tropical hardwood cores push its price above MR and BWR. Compare prices by thickness, grading, regional and dealer rates, and alternatives.

Block board price in India depends mainly on thickness, glue grade (MR, BWR or BWP) and face veneer, since every sheet is built on a core of eucalyptus or poplar strips glued edge to edge. Long hauls from northern mills also lift prices in the south.

HDHMR board sheets typically cost around ₹2,000 to ₹3,000 in India, with thickness, density (often 800-900 kg/m³) and brand setting the final rate. It resists humidity better than standard MDF, which is why it is used for wardrobes, kitchen cabinets and vanities.

In October 2026, 18-19mm plywood in India cost about ₹45-130 per sq ft for MR, ₹45-160 for BWR and ₹78-175 for BWP or marine, from local ISI sheets to national brands. An 8x4 sheet is 32 sq ft, so 18mm BWP runs about ₹2,500-5,600 a sheet; CenturyPly lists Sainik 710 at ₹122 per sq ft including GST.

No one can honestly quote a single all-India plywood price for 2026, but the direction of pressure can be forecast by type. Timber and veneer supply, resin costs, freight and demand will decide whether MR, BWR and BWP rates rise, hold or ease.